Read Switch controller gyro/accel sensitivity coeffs (SDL3)

These vary by controller, so using the stored values should improve the accuracy of the sensor data.

(cherry picked from commit 558a89fdb6b17e2968af221115974261c07d3d49)

src/joystick/hidapi/SDL_hidapi_switch.c

@@ -58,9 +58,7 @@
 #define SWITCH_GYRO_SCALE  14.2842f
 #define SWITCH_ACCEL_SCALE 4096.f
 
-#define SWITCH_GYRO_SCALE_OFFSET  13371.0f
 #define SWITCH_GYRO_SCALE_MULT    936.0f
-#define SWITCH_ACCEL_SCALE_OFFSET 16384.0f
 #define SWITCH_ACCEL_SCALE_MULT   4.0f
 
 enum
@@ -1044,6 +1042,8 @@ static bool LoadIMUCalibration(SDL_DriverSwitch_Context *ctx)
     if (WriteSubcommand(ctx, k_eSwitchSubcommandIDs_SPIFlashRead, (uint8_t *)&readParams, sizeof(readParams), &reply)) {
         Uint8 *pIMUScale;
         Sint16 sAccelRawX, sAccelRawY, sAccelRawZ, sGyroRawX, sGyroRawY, sGyroRawZ;
+        Sint16 sAccelSensCoeffX, sAccelSensCoeffY, sAccelSensCoeffZ;
+        Sint16 sGyroSensCoeffX, sGyroSensCoeffY, sGyroSensCoeffZ;
 
         // IMU scale gives us multipliers for converting raw values to real world values
         pIMUScale = reply->spiReadData.rgucReadData;
@@ -1052,10 +1052,18 @@ static bool LoadIMUCalibration(SDL_DriverSwitch_Context *ctx)
         sAccelRawY = (pIMUScale[3] << 8) | pIMUScale[2];
         sAccelRawZ = (pIMUScale[5] << 8) | pIMUScale[4];
 
+        sAccelSensCoeffX = (pIMUScale[7] << 8) | pIMUScale[6];
+        sAccelSensCoeffY = (pIMUScale[9] << 8) | pIMUScale[8];
+        sAccelSensCoeffZ = (pIMUScale[11] << 8) | pIMUScale[10];
+
         sGyroRawX = (pIMUScale[13] << 8) | pIMUScale[12];
         sGyroRawY = (pIMUScale[15] << 8) | pIMUScale[14];
         sGyroRawZ = (pIMUScale[17] << 8) | pIMUScale[16];
 
+        sGyroSensCoeffX = (pIMUScale[19] << 8) | pIMUScale[18];
+        sGyroSensCoeffY = (pIMUScale[21] << 8) | pIMUScale[20];
+        sGyroSensCoeffZ = (pIMUScale[23] << 8) | pIMUScale[22];
+
         // Check for user calibration data. If it's present and set, it'll override the factory settings
         readParams.unAddress = k_unSPIIMUUserScaleStartOffset;
         readParams.ucLength = k_unSPIIMUUserScaleLength;
@@ -1072,14 +1080,14 @@ static bool LoadIMUCalibration(SDL_DriverSwitch_Context *ctx)
         }
 
         // Accelerometer scale
-        ctx->m_IMUScaleData.fAccelScaleX = SWITCH_ACCEL_SCALE_MULT / (SWITCH_ACCEL_SCALE_OFFSET - (float)sAccelRawX) * SDL_STANDARD_GRAVITY;
-        ctx->m_IMUScaleData.fAccelScaleY = SWITCH_ACCEL_SCALE_MULT / (SWITCH_ACCEL_SCALE_OFFSET - (float)sAccelRawY) * SDL_STANDARD_GRAVITY;
-        ctx->m_IMUScaleData.fAccelScaleZ = SWITCH_ACCEL_SCALE_MULT / (SWITCH_ACCEL_SCALE_OFFSET - (float)sAccelRawZ) * SDL_STANDARD_GRAVITY;
+        ctx->m_IMUScaleData.fAccelScaleX = SWITCH_ACCEL_SCALE_MULT / ((float)sAccelSensCoeffX - (float)sAccelRawX) * SDL_STANDARD_GRAVITY;
+        ctx->m_IMUScaleData.fAccelScaleY = SWITCH_ACCEL_SCALE_MULT / ((float)sAccelSensCoeffY - (float)sAccelRawY) * SDL_STANDARD_GRAVITY;
+        ctx->m_IMUScaleData.fAccelScaleZ = SWITCH_ACCEL_SCALE_MULT / ((float)sAccelSensCoeffZ - (float)sAccelRawZ) * SDL_STANDARD_GRAVITY;
 
         // Gyro scale
-        ctx->m_IMUScaleData.fGyroScaleX = SWITCH_GYRO_SCALE_MULT / (SWITCH_GYRO_SCALE_OFFSET - (float)sGyroRawX) * SDL_PI_F / 180.0f;
-        ctx->m_IMUScaleData.fGyroScaleY = SWITCH_GYRO_SCALE_MULT / (SWITCH_GYRO_SCALE_OFFSET - (float)sGyroRawY) * SDL_PI_F / 180.0f;
-        ctx->m_IMUScaleData.fGyroScaleZ = SWITCH_GYRO_SCALE_MULT / (SWITCH_GYRO_SCALE_OFFSET - (float)sGyroRawZ) * SDL_PI_F / 180.0f;
+        ctx->m_IMUScaleData.fGyroScaleX = SWITCH_GYRO_SCALE_MULT / ((float)sGyroSensCoeffX - (float)sGyroRawX) * SDL_PI_F / 180.0f;
+        ctx->m_IMUScaleData.fGyroScaleY = SWITCH_GYRO_SCALE_MULT / ((float)sGyroSensCoeffY - (float)sGyroRawY) * SDL_PI_F / 180.0f;
+        ctx->m_IMUScaleData.fGyroScaleZ = SWITCH_GYRO_SCALE_MULT / ((float)sGyroSensCoeffZ - (float)sGyroRawZ) * SDL_PI_F / 180.0f;
 
     } else {
         // Use default values