-First version of PhysFS.NET.

extras/PhysFS.NET/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("PhysFS.NET")]
+[assembly: AssemblyDescription("PhysFS Bindings for .NET")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("PhysFS.NET")]
+[assembly: AssemblyCopyright("(c)2003 Gregory S. Read")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

extras/PhysFS.NET/PhysFS.NET.csproj

@@ -0,0 +1,113 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.0.9466"
+        SchemaVersion = "1.0"
+        ProjectGuid = "{C6205A43-3D4D-41E6-872C-96CD7BE55230}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = ""
+                AssemblyKeyContainerName = ""
+                AssemblyName = "PhysFS.NET"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "Library"
+                RootNamespace = "PhysFS.NET"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "true"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "true"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "true"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.XML.dll"
+                />
+                <Reference
+                    Name = "System.Drawing"
+                    AssemblyName = "System.Drawing"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.Drawing.dll"
+                />
+                <Reference
+                    Name = "System.Windows.Forms"
+                    AssemblyName = "System.Windows.Forms"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.Windows.Forms.dll"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "PhysFS.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "PhysFS_DLL.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "PhysFSFileStream.cs"
+                    SubType = "Code"
+                    BuildAction = "Compile"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

extras/PhysFS.NET/PhysFS.NET.sln

@@ -0,0 +1,21 @@
+Microsoft Visual Studio Solution File, Format Version 7.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "PhysFS.NET", "PhysFS.NET.csproj", "{C6205A43-3D4D-41E6-872C-96CD7BE55230}"
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		ConfigName.0 = Debug
+		ConfigName.1 = Release
+	EndGlobalSection
+	GlobalSection(ProjectDependencies) = postSolution
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.ActiveCfg = Debug|.NET
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.Build.0 = Debug|.NET
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.ActiveCfg = Release|.NET
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

extras/PhysFS.NET/PhysFS.cs

@@ -0,0 +1,189 @@
+/* PhysFS.cs - (c)2003 Gregory S. Read
+ * Provides access to PhysFS API calls not specific to file handle access.
+ */
+using System;
+
+namespace PhysFS_NET
+{
+   public class PhysFS
+   {
+      /* Initialize
+       * Inits the PhysFS API.  This normally does not need to be called unless
+       * the API has been manually deinitialized since the PhysFS_DLL class
+       * initializes just before the first call is made into the DLL.
+       * Parameters
+       *    none
+       * Returns
+       *    none
+       * Exceptions
+       *    PhysFSException - An error occured in the PhysFS API
+       */
+      public static void Initialize()
+      {
+         // Initialize the physfs library, raise an exception if error
+         if(PhysFS_DLL.PHYSFS_init("") == 0)
+            throw new PhysFSException();
+      }
+
+      /* Deinitialize
+       * Deinits the PhysFS API.  It is recommended that this method be called
+       * by the application before exiting in order to gracefully deallocate
+       * resources and close all filehandles, etc.
+       * Parameters
+       *    none
+       * Returns
+       *    none
+       * Exceptions
+       *    PhysFSException - An error occured in the PhysFS API
+       */
+      public static void Deinitialize()
+      {
+         // Deinit, raise an exception if an error occured
+         if(PhysFS_DLL.PHYSFS_deinit() == 0)
+            throw new PhysFSException();
+      }
+
+      /* BaseDir
+       * Gets the base directory configured for PhysFS.  See the PhysFS API
+       * documentation for more information.
+       * Parameters
+       *    none
+       * Returns
+       *    A string value representing the Base Directory
+       * Exceptions
+       *    none
+       */
+      public static string BaseDir
+      {
+         get
+         {
+            // Return the current base directory
+            return PhysFS_DLL.PHYSFS_getBaseDir();
+         }
+      }
+
+      /* WriteDir
+       * Gets or sets the write directory configured for PhysFS.  See the PhysFS API
+       * documentation for more information.
+       * Parameters
+       *    set - Path to set the WriteDir property to
+       * Returns
+       *    A string value representing the Write Directory
+       * Exceptions
+       *    PhysFSException - An error occured in the PhysFS API when
+       *       settings the write directory.
+       */
+      public static string WriteDir
+      {
+         get
+         {
+            // Return the current write directory
+            return PhysFS_DLL.PHYSFS_getWriteDir();
+         }
+         set
+         {
+            // Set the write directory and raise an exception if an error occured
+            if(PhysFS_DLL.PHYSFS_setWriteDir(value) == 0)
+               throw new PhysFSException();
+         }
+      }
+
+      /* UserDir
+       * Gets or sets the write directory configured for PhysFS.  See the PhysFS API
+       * documentation for more information.
+       * Parameters
+       *    set - Path to set the WriteDir property to
+       * Returns
+       *    A string value representing the Write Directory
+       * Exceptions
+       *    PhysFSException - An error occured in the PhysFS API when
+       *       settings the write directory.
+       */
+      public static string UserDir
+      {
+         get
+         {
+            // Return the current user directory
+            return PhysFS_DLL.PHYSFS_getUserDir();
+         }
+      }
+      public static void AddToSearchPath(string NewDir, bool Append)
+      {
+         if(PhysFS_DLL.PHYSFS_addToSearchPath(NewDir, Append?1:0) == 0)
+            throw new PhysFSException();
+      }
+      public static void RemoveFromSearchPath(string OldDir)
+      {
+         if(PhysFS_DLL.PHYSFS_removeFromSearchPath(OldDir) == 0)
+            throw new PhysFSException();
+      }
+      public unsafe static string[] GetSearchPath()
+      {
+         byte** p;				// Searchpath list from PhysFS dll
+         string[] pathlist;	// List converted to an array
+
+         // Get the CDROM drive listing
+         p = PhysFS_DLL.PHYSFS_getSearchPath();
+         // Convert the C-style array to a .NET style array
+         pathlist = PhysFS_DLL.BytePPToArray(p);
+         // Free the original list since we're done with it
+         PhysFS_DLL.PHYSFS_freeList(p);
+
+         return pathlist;
+      }
+      public unsafe static string[] GetCDROMDrives()
+      {
+         byte** p;				// CDROM list from PhysFS dll
+         string[] cdromlist;	// List converted to an array
+
+         // Get the CDROM drive listing
+         p = PhysFS_DLL.PHYSFS_getCdRomDirs();
+         // Convert the C-style array to a .NET style array
+         cdromlist = PhysFS_DLL.BytePPToArray(p);
+         // Free the original list since we're done with it
+         PhysFS_DLL.PHYSFS_freeList(p);
+
+         return cdromlist;
+      }
+      public static void MkDir(string Dirname)
+      {
+         if(PhysFS_DLL.PHYSFS_mkdir(Dirname) == 0)
+            throw new PhysFSException();
+      }
+      public static void Delete(string Filename)
+      {
+         if(PhysFS_DLL.PHYSFS_delete(Filename) == 0)
+            throw new PhysFSException();
+      }
+      public static string GetRealDir(string Filename)
+      {
+         string RetValue;
+
+         RetValue = PhysFS_DLL.PHYSFS_getRealDir(Filename);
+         if(RetValue == null)
+            throw new PhysFSException("File not found in search path.");
+
+         // Return the real file path of the specified filename
+         return RetValue;
+      }
+      public unsafe static string[] EnumerateFiles(string Dirname)
+      {
+         byte** p;				// File list from PhysFS dll
+         string[] filelist;	// List converted to an array
+
+         // Get the CDROM drive listing
+         p = PhysFS_DLL.PHYSFS_enumerateFiles(Dirname);
+         // Convert the C-style array to a .NET style array
+         filelist = PhysFS_DLL.BytePPToArray(p);
+         // Free the original list since we're done with it
+         PhysFS_DLL.PHYSFS_freeList(p);
+
+         return filelist;
+      }
+      public static bool IsDirectory(string Filename)
+      {
+         // Return true if non-zero, otherwise return false
+         return (PhysFS_DLL.PHYSFS_isDirectory(Filename) == 0)?false:true;
+      }
+   }
+}

extras/PhysFS.NET/PhysFSFileStream.cs

@@ -0,0 +1,194 @@
+/* PhysFSFileStream.cs - (c)2003 Gregory S. Read */
+using System;
+using System.Collections;
+using System.IO;
+
+namespace PhysFS_NET
+{
+   public enum PhysFSFileMode {Read, Write, Append};
+
+   // Our exception class we'll use for throwing all PhysFS API related exception
+   public class PhysFSException : IOException
+   {
+      public PhysFSException(string Message) : base(Message) {}
+      public PhysFSException() : base(PhysFS_DLL.PHYSFS_getLastError()) {}
+   }
+
+   public unsafe class PhysFSFileStream : Stream
+   {
+      // ***Public properties***
+      public override bool CanRead
+      {
+         get
+         {
+            // Reading is supported
+            return true;
+         }
+      }
+      
+      public override bool CanSeek
+      {
+         get
+         {
+            // Seek is supported
+            return true;
+         }
+      }
+
+      public override bool CanWrite
+      {
+         get
+         {
+            // Writing is supported
+            return true;
+         }
+      }
+
+      public override long Length
+      {
+         get
+         {
+            long TempLength;
+            TempLength = PhysFS_DLL.PHYSFS_fileLength(pHandle);
+
+            // If call returned an error, throw an exception
+            if(TempLength == -1)
+               throw new PhysFSException();
+
+            return TempLength;
+         }
+      }
+
+      public override long Position
+      {
+         get
+         {
+            long TempPosition;
+            TempPosition = PhysFS_DLL.PHYSFS_tell(pHandle);
+
+            // If call returned an error, throw an exception
+            if(TempPosition == -1)
+               throw new PhysFSException();
+
+            return TempPosition;
+         }
+         set
+         {
+            // Seek from beginning of file using the position value
+            Seek(value, SeekOrigin.Begin);
+         }
+      }
+      
+      // ***Public methods***
+      public PhysFSFileStream(string FileName, PhysFSFileMode FileMode, ulong BufferSize)
+      {
+         // Open the specified file with the appropriate file access
+         switch(FileMode)
+         {
+            case PhysFSFileMode.Read:
+               pHandle = PhysFS_DLL.PHYSFS_openRead(FileName);
+               break;
+            case PhysFSFileMode.Write:
+               pHandle = PhysFS_DLL.PHYSFS_openWrite(FileName);
+               break;
+            case PhysFSFileMode.Append:
+               pHandle = PhysFS_DLL.PHYSFS_openAppend(FileName);
+               break;
+            default:
+               throw new PhysFSException("Invalid FileMode specified");
+         }
+
+         // If handle is null, an error occured, so raise an exception
+         //!!! Does object get created if exception is thrown?
+         if(pHandle == null)
+            throw new PhysFSException();
+
+         // Set buffer size, raise an exception if an error occured
+         if(PhysFS_DLL.PHYSFS_setBuffer(pHandle, BufferSize) == 0)
+            throw new PhysFSException();
+      }
+
+      // This constructor sets the buffer size to 0 if not specified
+      public PhysFSFileStream(string FileName, PhysFSFileMode FileMode) : this(FileName, FileMode, 0) {}
+		
+      ~PhysFSFileStream()
+      {
+         // Don't close the handle if they've specifically closed it already
+         if(!Closed)
+            Close();
+      }
+
+      public override void Flush()
+      {
+         if(PhysFS_DLL.PHYSFS_flush(pHandle) == 0)
+            throw new PhysFSException();
+      }
+
+      public override int Read(byte[] buffer, int offset, int count)
+      {
+         long RetValue;
+   
+         fixed(byte *pbytes = &buffer[offset])
+         {
+            // Read into our allocated pointer
+            RetValue = PhysFS_DLL.PHYSFS_read(pHandle, pbytes, sizeof(byte), (uint)count);
+         }
+
+         if(RetValue == -1)
+            throw new PhysFSException();
+
+         // Return number of bytes read
+         // Note: This cast should be safe since we are only reading 'count' items, which
+         // is of type 'int'.
+         return (int)RetValue;
+      }
+
+      public override void Write(byte[] buffer, int offset, int count)
+      {
+         long RetValue;
+
+         fixed(byte* pbytes = &buffer[offset])
+         {
+            // Write buffer
+            RetValue = PhysFS_DLL.PHYSFS_write(pHandle, pbytes, sizeof(byte), (uint)count);
+         }
+
+         if(RetValue == -1)
+            throw new PhysFSException();
+      }
+
+      public override long Seek(long offset, SeekOrigin origin)
+      {
+         // Only seeking from beginning is supported by PhysFS API
+         if(origin != SeekOrigin.Begin)
+            throw new PhysFSException("Only seek origin of \"Begin\" is supported");
+         
+         // Seek to specified offset, raise an exception if error occured
+         if(PhysFS_DLL.PHYSFS_seek(pHandle, (ulong)offset) == 0)
+            throw new PhysFSException();
+
+         // Since we always seek from beginning, the offset is always
+         //  the absolute position.
+         return offset;
+      }
+
+      public override void SetLength(long value)
+      {
+         throw new NotSupportedException("SetLength method not supported in PhysFSFileStream objects.");
+      }
+
+      public override void Close()
+      {
+         // Close the handle
+         if(PhysFS_DLL.PHYSFS_close(pHandle) == 0)
+            throw new PhysFSException();
+
+         // File has been closed.  Rock.
+         Closed = true;
+      }
+
+      // ***Private variables***
+      private void *pHandle;
+      private bool Closed = false;
+   }
+}

extras/PhysFS.NET/PhysFS_DLL.cs

@@ -0,0 +1,113 @@
+/* PhysFS_DLL - (c)2003 Gregory S. Read
+ * Internal class that provides direct access to the PhysFS DLL.  It is
+ * not accessible outside of the PhysFS.NET assembly.
+ */
+using System.Collections;
+using System.Runtime.InteropServices;
+
+namespace PhysFS_NET
+{
+   internal class PhysFS_DLL
+   {
+      /* Static constructor
+       * Initializes the PhysFS API before any method is called in this class.  This
+       * relieves the user from having to explicitly initialize the API.
+       * Parameters
+       *    none
+       * Returns
+       *    none
+       * Exceptions
+       *    PhysFSException - An error occured in the PhysFS API
+       */
+      static PhysFS_DLL()
+      {
+         if(PHYSFS_init("") == 0)
+            throw new PhysFSException();
+      }
+
+      /* BytePPToArray
+       * Converts a C-style string array into a .NET managed string array
+       * Parameters
+       *    C-style string array pointer returned from PhysFS
+       * Returns
+       *    .NET managed string array
+       * Exceptions
+       *    none
+       */
+      public unsafe static string[] BytePPToArray(byte **bytearray)
+      {
+         byte** ptr;
+         byte* c;
+         string tempstr;
+         ArrayList MyArrayList = new ArrayList();
+         string[] RetArray;
+
+         for(ptr = bytearray; *ptr != null; ptr++)
+         {
+            tempstr = "";
+            for(c = *ptr; *c != 0; c++)
+            {
+               tempstr += (char)*c;
+            }
+
+            // Add string to our list
+            MyArrayList.Add(tempstr);
+         }
+
+         // Return a normal array of the list
+         RetArray = new string[MyArrayList.Count];
+         MyArrayList.CopyTo(RetArray, 0);
+         return RetArray;
+      }
+
+      // Name of DLL to import
+      private const string PHYSFS_DLLNAME = "physfs.dll";
+
+      // DLL import declarations
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_init(string argv0);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_deinit();
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void PHYSFS_freeList(void *listVar);
+      [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getLastError();
+      [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getDirSeparator();
+      [DllImport(PHYSFS_DLLNAME)] public static extern void PHYSFS_permitSymbolicLinks(int allow);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe byte** PHYSFS_getCdRomDirs();
+      [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getBaseDir();
+      [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getUserDir();
+      [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getWriteDir();
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_setWriteDir(string newDir);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_addToSearchPath(string newDir, int appendToPath);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_removeFromSearchPath(string oldDir);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe byte** PHYSFS_getSearchPath();
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_setSaneConfig(string organization,
+         string appName,
+         string archiveExt,
+         int includeCdRoms,
+         int archivesFirst);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_mkdir(string dirName);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_delete(string filename);
+      [DllImport(PHYSFS_DLLNAME)] public static extern string PHYSFS_getRealDir(string filename);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe byte** PHYSFS_enumerateFiles(string dir);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_exists(string fname);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_isDirectory(string fname);
+      [DllImport(PHYSFS_DLLNAME)] public static extern int PHYSFS_isSymbolicLink(string fname);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void* PHYSFS_openWrite(string filename);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void* PHYSFS_openAppend(string filename);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe void* PHYSFS_openRead(string filename);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_close(void* handle);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_getLastModTime(string filename);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_read(void* handle,
+         void *buffer,
+         uint objSize,
+         uint objCount);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_write(void* handle,
+         void *buffer,
+         uint objSize,
+         uint objCount);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_eof(void* handle);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_tell(void* handle);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_seek(void* handle, ulong pos);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe long PHYSFS_fileLength(void* handle);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_setBuffer(void* handle, ulong bufsize);
+      [DllImport(PHYSFS_DLLNAME)] public static extern unsafe int PHYSFS_flush(void* handle);
+   }
+}

extras/PhysFS.NET/README.txt

@@ -0,0 +1,10 @@
+PhysFS.NET is a library that encapsulates the PhysFS API into a .NET assembly.
+
+There are two class objects that are exposed in the assembly:
+   PhysFS.cs
+      This class exposes any non-filehandle specific functionality contained in
+      the PhysFS library.
+   PhysFSFileStream.cs
+      A System.IO.Stream derived class which provides file access via the
+      PhysFS API.  Usage of this object is identical to a standard stream
+      object.    

extras/PhysFS.NET/TestApp/AssemblyInfo.cs

@@ -0,0 +1,58 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+
+//
+// General Information about an assembly is controlled through the following 
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+//
+[assembly: AssemblyTitle("")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("")]
+[assembly: AssemblyCopyright("")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]		
+
+//
+// Version information for an assembly consists of the following four values:
+//
+//      Major Version
+//      Minor Version 
+//      Build Number
+//      Revision
+//
+// You can specify all the values or you can default the Revision and Build Numbers 
+// by using the '*' as shown below:
+
+[assembly: AssemblyVersion("1.0.*")]
+
+//
+// In order to sign your assembly you must specify a key to use. Refer to the 
+// Microsoft .NET Framework documentation for more information on assembly signing.
+//
+// Use the attributes below to control which key is used for signing. 
+//
+// Notes: 
+//   (*) If no key is specified, the assembly is not signed.
+//   (*) KeyName refers to a key that has been installed in the Crypto Service
+//       Provider (CSP) on your machine. KeyFile refers to a file which contains
+//       a key.
+//   (*) If the KeyFile and the KeyName values are both specified, the 
+//       following processing occurs:
+//       (1) If the KeyName can be found in the CSP, that key is used.
+//       (2) If the KeyName does not exist and the KeyFile does exist, the key 
+//           in the KeyFile is installed into the CSP and used.
+//   (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
+//       When specifying the KeyFile, the location of the KeyFile should be
+//       relative to the project output directory which is
+//       %Project Directory%\obj\<configuration>. For example, if your KeyFile is
+//       located in the project directory, you would specify the AssemblyKeyFile 
+//       attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
+//   (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
+//       documentation for more information on this.
+//
+[assembly: AssemblyDelaySign(false)]
+[assembly: AssemblyKeyFile("")]
+[assembly: AssemblyKeyName("")]

extras/PhysFS.NET/TestApp/TestApp.csproj

@@ -0,0 +1,116 @@
+<VisualStudioProject>
+    <CSHARP
+        ProjectType = "Local"
+        ProductVersion = "7.0.9466"
+        SchemaVersion = "1.0"
+        ProjectGuid = "{9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}"
+    >
+        <Build>
+            <Settings
+                ApplicationIcon = "App.ico"
+                AssemblyKeyContainerName = ""
+                AssemblyName = "TestApp"
+                AssemblyOriginatorKeyFile = ""
+                DefaultClientScript = "JScript"
+                DefaultHTMLPageLayout = "Grid"
+                DefaultTargetSchema = "IE50"
+                DelaySign = "false"
+                OutputType = "WinExe"
+                RootNamespace = "TestApp"
+                StartupObject = ""
+            >
+                <Config
+                    Name = "Debug"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "DEBUG;TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "true"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "true"
+                    Optimize = "false"
+                    OutputPath = "bin\Debug\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+                <Config
+                    Name = "Release"
+                    AllowUnsafeBlocks = "false"
+                    BaseAddress = "285212672"
+                    CheckForOverflowUnderflow = "false"
+                    ConfigurationOverrideFile = ""
+                    DefineConstants = "TRACE"
+                    DocumentationFile = ""
+                    DebugSymbols = "false"
+                    FileAlignment = "4096"
+                    IncrementalBuild = "false"
+                    Optimize = "true"
+                    OutputPath = "bin\Release\"
+                    RegisterForComInterop = "false"
+                    RemoveIntegerChecks = "false"
+                    TreatWarningsAsErrors = "false"
+                    WarningLevel = "4"
+                />
+            </Settings>
+            <References>
+                <Reference
+                    Name = "System"
+                    AssemblyName = "System"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.dll"
+                />
+                <Reference
+                    Name = "System.Data"
+                    AssemblyName = "System.Data"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.Data.dll"
+                />
+                <Reference
+                    Name = "System.Drawing"
+                    AssemblyName = "System.Drawing"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.Drawing.dll"
+                />
+                <Reference
+                    Name = "System.Windows.Forms"
+                    AssemblyName = "System.Windows.Forms"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.Windows.Forms.dll"
+                />
+                <Reference
+                    Name = "System.XML"
+                    AssemblyName = "System.Xml"
+                    HintPath = "C:\WINDOWS\Microsoft.NET\Framework\v1.0.3705\System.XML.dll"
+                />
+                <Reference
+                    Name = "PhysFS.NET"
+                    Project = "{C6205A43-3D4D-41E6-872C-96CD7BE55230}"
+                    Package = "{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}"
+                />
+            </References>
+        </Build>
+        <Files>
+            <Include>
+                <File
+                    RelPath = "App.ico"
+                    BuildAction = "Content"
+                />
+                <File
+                    RelPath = "AssemblyInfo.cs"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "TestAppForm.cs"
+                    SubType = "Form"
+                    BuildAction = "Compile"
+                />
+                <File
+                    RelPath = "TestAppForm.resx"
+                    DependentUpon = "TestAppForm.cs"
+                    BuildAction = "EmbeddedResource"
+                />
+            </Include>
+        </Files>
+    </CSHARP>
+</VisualStudioProject>
+

extras/PhysFS.NET/TestApp/TestApp.sln

@@ -0,0 +1,27 @@
+Microsoft Visual Studio Solution File, Format Version 7.00
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "TestApp", "TestApp.csproj", "{9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}"
+EndProject
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "PhysFS.NET", "..\PhysFS.NET.csproj", "{C6205A43-3D4D-41E6-872C-96CD7BE55230}"
+EndProject
+Global
+	GlobalSection(SolutionConfiguration) = preSolution
+		ConfigName.0 = Debug
+		ConfigName.1 = Release
+	EndGlobalSection
+	GlobalSection(ProjectDependencies) = postSolution
+	EndGlobalSection
+	GlobalSection(ProjectConfiguration) = postSolution
+		{9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Debug.ActiveCfg = Debug|.NET
+		{9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Debug.Build.0 = Debug|.NET
+		{9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Release.ActiveCfg = Release|.NET
+		{9C1ECC6B-16C7-42B3-BF7C-8BA8D81BA980}.Release.Build.0 = Release|.NET
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.ActiveCfg = Debug|.NET
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Debug.Build.0 = Debug|.NET
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.ActiveCfg = Release|.NET
+		{C6205A43-3D4D-41E6-872C-96CD7BE55230}.Release.Build.0 = Release|.NET
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+	EndGlobalSection
+	GlobalSection(ExtensibilityAddIns) = postSolution
+	EndGlobalSection
+EndGlobal

extras/PhysFS.NET/TestApp/TestAppForm.cs

@@ -0,0 +1,274 @@
+using System;
+using System.Drawing;
+using System.Collections;
+using System.ComponentModel;
+using System.Windows.Forms;
+using System.Data;
+using System.IO;
+using PhysFS_NET;
+
+namespace TestApp
+{
+	/// <summary>
+	/// Summary description for Form1.
+	/// </summary>
+	public class TestAppForm : System.Windows.Forms.Form
+	{
+      private System.Windows.Forms.Label label2;
+      private System.Windows.Forms.Button RefreshCDsButton;
+      private System.Windows.Forms.ListBox CDDrivesList;
+      private System.Windows.Forms.ListBox SearchPathList;
+      private System.Windows.Forms.Label label1;
+      private System.Windows.Forms.TextBox EnumFilesPath;
+      private System.Windows.Forms.ListBox EnumList;
+      private System.Windows.Forms.Label label3;
+      private System.Windows.Forms.TextBox NewSearchPathText;
+      private System.Windows.Forms.Button AddSearchPathButton;
+      private System.Windows.Forms.Button RemovePathButton;
+      private System.Windows.Forms.Button RefreshEnumList;
+      private System.Windows.Forms.Button RefreshSearchPathButton;
+		/// <summary>
+		/// Required designer variable.
+		/// </summary>
+		private System.ComponentModel.Container components = null;
+
+		public TestAppForm()
+		{
+			//
+			// Required for Windows Form Designer support
+			//
+			InitializeComponent();
+
+			//
+			// TODO: Add any constructor code after InitializeComponent call
+			//
+		}
+
+		/// <summary>
+		/// Clean up any resources being used.
+		/// </summary>
+		protected override void Dispose( bool disposing )
+		{
+			if( disposing )
+			{
+				if (components != null) 
+				{
+					components.Dispose();
+				}
+			}
+			base.Dispose( disposing );
+		}
+
+		#region Windows Form Designer generated code
+		/// <summary>
+		/// Required method for Designer support - do not modify
+		/// the contents of this method with the code editor.
+		/// </summary>
+		private void InitializeComponent()
+		{
+         this.label2 = new System.Windows.Forms.Label();
+         this.RefreshCDsButton = new System.Windows.Forms.Button();
+         this.CDDrivesList = new System.Windows.Forms.ListBox();
+         this.SearchPathList = new System.Windows.Forms.ListBox();
+         this.label1 = new System.Windows.Forms.Label();
+         this.EnumFilesPath = new System.Windows.Forms.TextBox();
+         this.EnumList = new System.Windows.Forms.ListBox();
+         this.label3 = new System.Windows.Forms.Label();
+         this.RefreshEnumList = new System.Windows.Forms.Button();
+         this.NewSearchPathText = new System.Windows.Forms.TextBox();
+         this.AddSearchPathButton = new System.Windows.Forms.Button();
+         this.RemovePathButton = new System.Windows.Forms.Button();
+         this.RefreshSearchPathButton = new System.Windows.Forms.Button();
+         this.SuspendLayout();
+         // 
+         // label2
+         // 
+         this.label2.Location = new System.Drawing.Point(8, 8);
+         this.label2.Name = "label2";
+         this.label2.Size = new System.Drawing.Size(136, 16);
+         this.label2.TabIndex = 2;
+         this.label2.Text = "Available CD-ROM Drives";
+         // 
+         // RefreshCDsButton
+         // 
+         this.RefreshCDsButton.Location = new System.Drawing.Point(8, 152);
+         this.RefreshCDsButton.Name = "RefreshCDsButton";
+         this.RefreshCDsButton.Size = new System.Drawing.Size(72, 24);
+         this.RefreshCDsButton.TabIndex = 4;
+         this.RefreshCDsButton.Text = "Refresh";
+         this.RefreshCDsButton.Click += new System.EventHandler(this.RefreshCDsButton_Click);
+         // 
+         // CDDrivesList
+         // 
+         this.CDDrivesList.Location = new System.Drawing.Point(8, 24);
+         this.CDDrivesList.Name = "CDDrivesList";
+         this.CDDrivesList.Size = new System.Drawing.Size(136, 121);
+         this.CDDrivesList.TabIndex = 7;
+         // 
+         // SearchPathList
+         // 
+         this.SearchPathList.Location = new System.Drawing.Point(152, 24);
+         this.SearchPathList.Name = "SearchPathList";
+         this.SearchPathList.Size = new System.Drawing.Size(248, 95);
+         this.SearchPathList.TabIndex = 8;
+         // 
+         // label1
+         // 
+         this.label1.Location = new System.Drawing.Point(152, 8);
+         this.label1.Name = "label1";
+         this.label1.Size = new System.Drawing.Size(136, 16);
+         this.label1.TabIndex = 10;
+         this.label1.Text = "Search Path";
+         // 
+         // EnumFilesPath
+         // 
+         this.EnumFilesPath.Location = new System.Drawing.Point(408, 128);
+         this.EnumFilesPath.Name = "EnumFilesPath";
+         this.EnumFilesPath.Size = new System.Drawing.Size(208, 20);
+         this.EnumFilesPath.TabIndex = 11;
+         this.EnumFilesPath.Text = "";
+         // 
+         // EnumList
+         // 
+         this.EnumList.Location = new System.Drawing.Point(408, 24);
+         this.EnumList.Name = "EnumList";
+         this.EnumList.Size = new System.Drawing.Size(208, 95);
+         this.EnumList.TabIndex = 12;
+         // 
+         // label3
+         // 
+         this.label3.Location = new System.Drawing.Point(408, 8);
+         this.label3.Name = "label3";
+         this.label3.Size = new System.Drawing.Size(136, 16);
+         this.label3.TabIndex = 13;
+         this.label3.Text = "Enumerate Files";
+         // 
+         // RefreshEnumList
+         // 
+         this.RefreshEnumList.Location = new System.Drawing.Point(544, 152);
+         this.RefreshEnumList.Name = "RefreshEnumList";
+         this.RefreshEnumList.Size = new System.Drawing.Size(72, 24);
+         this.RefreshEnumList.TabIndex = 14;
+         this.RefreshEnumList.Text = "Refresh";
+         this.RefreshEnumList.Click += new System.EventHandler(this.RefreshEnumList_Click);
+         // 
+         // NewSearchPathText
+         // 
+         this.NewSearchPathText.Location = new System.Drawing.Point(152, 128);
+         this.NewSearchPathText.Name = "NewSearchPathText";
+         this.NewSearchPathText.Size = new System.Drawing.Size(248, 20);
+         this.NewSearchPathText.TabIndex = 15;
+         this.NewSearchPathText.Text = "";
+         // 
+         // AddSearchPathButton
+         // 
+         this.AddSearchPathButton.Location = new System.Drawing.Point(152, 152);
+         this.AddSearchPathButton.Name = "AddSearchPathButton";
+         this.AddSearchPathButton.Size = new System.Drawing.Size(72, 24);
+         this.AddSearchPathButton.TabIndex = 9;
+         this.AddSearchPathButton.Text = "Add Path";
+         this.AddSearchPathButton.Click += new System.EventHandler(this.AddSearchPathButton_Click);
+         // 
+         // RemovePathButton
+         // 
+         this.RemovePathButton.Location = new System.Drawing.Point(232, 152);
+         this.RemovePathButton.Name = "RemovePathButton";
+         this.RemovePathButton.Size = new System.Drawing.Size(88, 24);
+         this.RemovePathButton.TabIndex = 16;
+         this.RemovePathButton.Text = "Remove Path";
+         this.RemovePathButton.Click += new System.EventHandler(this.RemovePathButton_Click);
+         // 
+         // RefreshSearchPathButton
+         // 
+         this.RefreshSearchPathButton.Location = new System.Drawing.Point(328, 152);
+         this.RefreshSearchPathButton.Name = "RefreshSearchPathButton";
+         this.RefreshSearchPathButton.Size = new System.Drawing.Size(72, 24);
+         this.RefreshSearchPathButton.TabIndex = 17;
+         this.RefreshSearchPathButton.Text = "Refresh";
+         this.RefreshSearchPathButton.Click += new System.EventHandler(this.RefreshSearchPathButton_Click);
+         // 
+         // TestAppForm
+         // 
+         this.AutoScaleBaseSize = new System.Drawing.Size(5, 13);
+         this.ClientSize = new System.Drawing.Size(624, 309);
+         this.Controls.AddRange(new System.Windows.Forms.Control[] {
+                                                                      this.RefreshSearchPathButton,
+                                                                      this.RemovePathButton,
+                                                                      this.NewSearchPathText,
+                                                                      this.RefreshEnumList,
+                                                                      this.label3,
+                                                                      this.EnumList,
+                                                                      this.EnumFilesPath,
+                                                                      this.label1,
+                                                                      this.SearchPathList,
+                                                                      this.CDDrivesList,
+                                                                      this.RefreshCDsButton,
+                                                                      this.label2,
+                                                                      this.AddSearchPathButton});
+         this.Name = "TestAppForm";
+         this.Text = "PhysFS Test Application";
+         this.Load += new System.EventHandler(this.TestAppForm_Load);
+         this.ResumeLayout(false);
+
+      }
+		#endregion
+
+		/// <summary>
+		/// The main entry point for the application.
+		/// </summary>
+		[STAThread]
+		static void Main() 
+		{
+         Application.Run(new TestAppForm());
+		}
+
+      private void TestAppForm_Load(object sender, System.EventArgs e)
+      {
+      
+      }
+
+      private void RefreshCDsButton_Click(object sender, System.EventArgs e)
+      {
+         // Clear ths listbox if it contains any items
+         CDDrivesList.Items.Clear();
+         // Add the items to the list
+         CDDrivesList.Items.AddRange(PhysFS.GetCDROMDrives());
+      }
+
+      private void RefreshSearchPathButton_Click(object sender, System.EventArgs e)
+      {
+         // Clear ths listbox if it contains any items
+         SearchPathList.Items.Clear();
+         // Add the items to the list
+         SearchPathList.Items.AddRange(PhysFS.GetSearchPath());
+      }
+
+      private void AddSearchPathButton_Click(object sender, System.EventArgs e)
+      {
+         // Add search path
+         PhysFS.AddToSearchPath(NewSearchPathText.Text, false);
+         // Clear ths listbox if it contains any items
+         SearchPathList.Items.Clear();
+         // Add the items to the list
+         SearchPathList.Items.AddRange(PhysFS.GetSearchPath());
+      }
+
+      private void RemovePathButton_Click(object sender, System.EventArgs e)
+      {
+         if(SearchPathList.SelectedItem != null)
+         {
+            PhysFS.RemoveFromSearchPath(SearchPathList.SelectedItem.ToString());
+            // Clear ths listbox if it contains any items
+            SearchPathList.Items.Clear();
+            // Add the items to the list
+            SearchPathList.Items.AddRange(PhysFS.GetSearchPath());
+         }
+      }
+
+      private void RefreshEnumList_Click(object sender, System.EventArgs e)
+      {
+         EnumList.Items.Clear();
+         EnumList.Items.AddRange(PhysFS.EnumerateFiles(EnumFilesPath.Text));
+      }
+	}
+}

extras/PhysFS.NET/TestApp/TestAppForm.resx

@@ -0,0 +1,102 @@
+<?xml version="1.0" encoding="utf-8"?>
+<root>
+  <!-- 
+            Microsoft ResX Schema 
+        
+            Version 1.3
+                
+            The primary goals of this format is to allow a simple XML format 
+            that is mostly human readable. The generation and parsing of the 
+            various data types are done through the TypeConverter classes 
+            associated with the data types.
+        
+            Example:
+        
+                ... ado.net/XML headers & schema ...
+                <resheader name="resmimetype">text/microsoft-resx</resheader>
+                <resheader name="version">1.3</resheader>
+                <resheader name="reader">System.Resources.ResXResourceReader, System.Windows.Forms, ...</resheader>
+                <resheader name="writer">System.Resources.ResXResourceWriter, System.Windows.Forms, ...</resheader>
+                <data name="Name1">this is my long string</data>
+                <data name="Color1" type="System.Drawing.Color, System.Drawing">Blue</data>
+                <data name="Bitmap1" mimetype="application/x-microsoft.net.object.binary.base64">
+                    [base64 mime encoded serialized .NET Framework object]
+                </data>
+                <data name="Icon1" type="System.Drawing.Icon, System.Drawing" mimetype="application/x-microsoft.net.object.bytearray.base64">
+                    [base64 mime encoded string representing a byte array form of the .NET Framework object]
+                </data>
+        
+            There are any number of "resheader" rows that contain simple 
+            name/value pairs.
+            
+            Each data row contains a name, and value. The row also contains a 
+            type or mimetype. Type corresponds to a .NET class that support 
+            text/value conversion through the TypeConverter architecture. 
+            Classes that don't support this are serialized and stored with the 
+            mimetype set.
+                     
+            The mimetype is used for serialized objects, and tells the 
+            ResXResourceReader how to depersist the object. This is currently not 
+            extensible. For a given mimetype the value must be set accordingly:
+        
+            Note - application/x-microsoft.net.object.binary.base64 is the format 
+                   that the ResXResourceWriter will generate, however the reader can 
+                   read any of the formats listed below.
+        
+            mimetype: application/x-microsoft.net.object.binary.base64
+            value   : The object must be serialized with 
+                    : System.Serialization.Formatters.Binary.BinaryFormatter
+                    : and then encoded with base64 encoding.
+        
+            mimetype: application/x-microsoft.net.object.soap.base64
+            value   : The object must be serialized with 
+                    : System.Runtime.Serialization.Formatters.Soap.SoapFormatter
+                    : and then encoded with base64 encoding.
+            mimetype: application/x-microsoft.net.object.bytearray.base64
+            value   : The object must be serialized into a byte array 
+                    : using a System.ComponentModel.TypeConverter
+                    : and then encoded with base64 encoding.
+        -->
+  <xsd:schema id="root" xmlns="" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
+    <xsd:element name="root" msdata:IsDataSet="true">
+      <xsd:complexType>
+        <xsd:choice maxOccurs="unbounded">
+          <xsd:element name="data">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+                <xsd:element name="comment" type="xsd:string" minOccurs="0" msdata:Ordinal="2" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" msdata:Ordinal="1" />
+              <xsd:attribute name="type" type="xsd:string" msdata:Ordinal="3" />
+              <xsd:attribute name="mimetype" type="xsd:string" msdata:Ordinal="4" />
+            </xsd:complexType>
+          </xsd:element>
+          <xsd:element name="resheader">
+            <xsd:complexType>
+              <xsd:sequence>
+                <xsd:element name="value" type="xsd:string" minOccurs="0" msdata:Ordinal="1" />
+              </xsd:sequence>
+              <xsd:attribute name="name" type="xsd:string" use="required" />
+            </xsd:complexType>
+          </xsd:element>
+        </xsd:choice>
+      </xsd:complexType>
+    </xsd:element>
+  </xsd:schema>
+  <resheader name="resmimetype">
+    <value>text/microsoft-resx</value>
+  </resheader>
+  <resheader name="version">
+    <value>1.3</value>
+  </resheader>
+  <resheader name="reader">
+    <value>System.Resources.ResXResourceReader, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <resheader name="writer">
+    <value>System.Resources.ResXResourceWriter, System.Windows.Forms, Version=1.0.3300.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</value>
+  </resheader>
+  <data name="$this.Name">
+    <value>TestAppForm</value>
+  </data>
+</root>